Fluorescent aluminum chelate complexes as modified precursors for nano-structured alumina

A series of new mononuclear heteroleptic derivatives of aluminum(III), {[(CH₃COCHCOCH₃)AlL] (1 and 4)}, {[(C₆H₅COCHCOC₆H₅)AlL] (2, 5, and 7)}, and {[(C₉H₆NO)AlL] (3 and 6)}, have been synthesized by reacting Al(OPrⁱ)₃ with tridentate Schiff base H₂L^x (H₂L¹ = C₁₃H₁₀BrNO₂; H₂L² = C₁₄H₁₃NO₃; H₂L³ = C₁₇H₁₃NO₂) and β-diketone/8-hydroxyquinoline (β-diketone = acetylacetone/dibenzoylmethane) in 1?:?1?:?1 stoichiometry using anhydrous benzene and ethanol. All the complexes were characterized by elemental analysis, FTIR, and NMR (¹H and ¹³C) spectral studies. Molecular structures obtained from single-crystal XRD of aqua 1 (1a) and DMSO coordinated 2 (2a) authenticate their existence. Further, nanostructured α-alumina was synthesized from 1 by well-established sol–gel method and was characterized by powder XRD, TEM, and EDX analyses.     

New theoretical considerations in polymer rheology: elastic breakdown of chain entanglement network

Recent experimental evidence has motivated us to present a set of new theoretical considerations and to provide a rationale for interpreting the intriguing flow phenomena observed in entangled polymer solutions and melts [P. Tapadia and S. Q. Wang, Phys. Rev. Lett. 96, 016001 (2006); 96, 196001 (2006); S. Q. Wang et al., ibid. 97, 187801 (2006)]. Three forces have been recognized to play important roles in controlling the response of a strained entanglement network. During flow, an intermolecular locking force f(iml) arises and causes conformational deformation in each load-bearing strand between entanglements. The chain deformation builds up a retractive force f(retract) within each strand. Chain entanglement prevails in quiescence because a given chain prefers to stay interpenetrating into other chains within its pervaded volume so as to enjoy maximum conformational entropy. Since each strand of length l(ent) has entropy equal to k(B)T, the disentanglement criterion is given by f(retract)>f(ent) approximately k(B)Tl(ent) in the case of interrupted deformation. This condition identifies f(ent) as a cohesive force. Imbalance among these forces causes elastic breakdown of the entanglement network. For example, an entangled polymer yields during continuous deformation when the declining f(iml) cannot sustain the elevated f(retract). This opposite trend of the two forces is at the core of the physics governing a "cohesive" breakdown at the yield point (i.e., the stress overshoot) in startup flow. Identifying the yield point as the point of force imbalance, we can also rationalize the recently observed striking scaling behavior associated with the yield point in continuous deformation of both shear and extension.     

New synthetic routes to chain-extended selenium, sulfur, and nitrogen analogues of the naturally occurring glucosidase inhibitor salacinol and their inhibitory activities against recombinant human maltase glucoamylase

Six heteroanalogues (X = S, Se, NH) of the naturally occurring glucosidase inhibitor salacinol, containing polyhydroxylated, acyclic chains of 6-carbons, were synthesized for structure-activity studies with different glycosidase enzymes. The target zwitterionic compounds were synthesized by means of nucleophilic attack of the PMB-protected 1,4-anhydro-4-seleno-, 1,4-anhydro-4-thio-, and 1,4-anhydro-4-imino-D-arabinitols at the least hindered carbon atom of 1,3-cyclic sulfates. These 1,3-cyclic sulfates were derived from D-glucose and D-galactose, and significantly, they utilized butane diacetal as the protecting groups for the trans 2,3-diequatorial positions. Deprotection of the coupled products proceeded smoothly, unlike in previous attempts with different protecting groups, and afforded the target selenonium, sulfonium, and ammonium sulfates with different stereochemistry at the stereogenic centers. The four new heterosubstituted compounds (X = Se, NH) inhibited recombinant human maltase glucoamylase (MGA), one of the key intestinal enzymes involved in the breakdown of glucose oligosaccharides in the small intestine. The two selenium derivatives each had Ki values of 0.10 microM, giving the most active compounds to date in this general series of zwitterionic glycosidase inhibitors. The two nitrogen compounds also inhibited MGA but were less active, with Ki values of 0.8 and 35 microM. The compounds in which X = S showed Ki values of 0.25 and 0.17 microM. Comparison of these data with those reported previously for related compounds reinforces the requirements for an effective inhibitor of MGA. With respect to chain extension, the configurations at C-2' and C-4' are critical for activity, the configuration at C-3', bearing the sulfate moiety, being unimportant. It would also appear that the configuration at C-5' is important but the relationship is dependent on the heteroatom.     

Phase‐controlled epitaxial growth of iron oxide thin films on MgO(001) and LaAlO3(001) substrates

We have deposited epitaxial iron oxide thin films on MgO(001) and LaAlO₃(LAO)(001) substrates, resulting in different phase stabilities. Atomic force microscopy images revealed a smooth surface. Detailed X‐ray diffraction (XRD) measurements were performed to confirm the epitaxial growth and to analyze the atomic growth configuration. We found that (00l) oriented γ‐Fe₂O₃ was the stable phase on MgO(001) substrates, whereas $ (1\bar 102) $ oriented α‐Fe₂O₃ was stable on LAO(001). Magnetic hysteresis loop measurements revealed typical ferrimagnetic behavior for γ‐Fe₂O₃ on MgO, whereas the magnetization of α‐Fe₂O₃ on LAO was relatively small and consistent with an antiferromagnetic order. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A strategy for extending the applicability of a validated plasma calibration curve to quantitative measurements in multiple tissue homogenate samples: a case study from a rat tissue distribution study of JI-101, a triple kinase inhibitor

A general practice in bioanalysis is that, whatever the biological matrix the analyte is being quantified in, the validation is performed in the same matrix as per regulatory guidelines. In this paper, we are presenting the applicability of a validated LC‐MS/MS method in rat plasma for JI‐101, to estimate the concentrations of JI‐101 in various tissues that were harvested in a rat tissue distribution study. A simple protein precipitation technique was used to extract JI‐101 and internal standard from the tissue homogenates. The recovery of JI‐101 in all the matrices was found to be >70%. Chromatographic separation was achieved using a binary gradient using mobile phase A (acetonitrile) and B (0.2% formic acid in water) at a flow rate of 0.30 mL/min on a Prodigy ODS column with a total run time of 4.0 min. The MS/MS ion transitions monitored were 466.1 → 265 for JI‐101 and 180.1 → 110.1 for internal standard. The linearity range was 5.02–4017 ng/mL. The JI‐101 levels were quantifiable in the various tissue samples harvested in this study. Therefore, the use of a previously validated JI‐101 assay in plasma circumvented the tedious process of method development/validation in various tissue matrices. Copyright © 2011 John Wiley & Sons, Ltd.     

A rapid LC-MS/MS method for quantitation of eszopiclone in human plasma: application to a human pharmacokinetic study

A highly reproducible, specific and cost-effective LC-MS/MS method was developed for simultaneous estimation of eszopiclone (ESZ) with 50 μL of human plasma using paroxetine as an internal standard (IS). The API-4000 LC-MS/MS was operated under the multiple reaction-monitoring mode using the electrospray ionization technique. A simple liquid-liquid extraction process was used to extract ESZ and IS from human plasma. The total run time was 1.5 min and the elution of ESZ and IS occurred at 0.90 min; this was achieved with a mobile phase consisting of 0.1% formic acid-methanol (15:85, v/v) at a flow rate of 0.50 mL/min on a Discover C(18) (50 × 4.6 mm, 5 μm) column. The developed method was validated in human plasma with a lower limit of quantitation of 0.1 ng/mL for ESZ. A linear response function was established for the range of concentrations 0.10-120 ng/mL (r > 0.998) for ESZ. The intra- and inter-day precision values for ESZ were acceptable as per FDA guidelines. Eszopiclone was stable in the battery of stability studies, viz. bench-top, autosampler and freeze-thaw cycles. The developed assay method was applied to an oral bioequivalence study in humans.     

Development and validation of a highly sensitive LC-MS/MS method for quantitation of dexlansoprazole in human plasma: application to a human pharmacokinetic study

A highly sensitive, specific and simple LC-MS/MS method was developed for the simultaneous estimation of dexlansoprazole (DEX) with 50 μL of human plasma using omeprazole as an internal standard (IS). The API-4000 LC-MS/MS was operated under multiple reaction-monitoring mode using electrospray ionization. A simple liquid-liquid extraction process was used to extract DEX and IS from human plasma. The total run time was 2.00 min and the elution of DEX and IS occurred at 1.20 min. This was achieved with a mobile phase consisting of 0.2% ammonia-acetonitrile (20:80, v/v) at a flow rate of 0.50 mL/min on an X-terra RP 18 (50 × 4.6 mm, 5 μm) column. The developed method was validated in human plasma with a lower limit of quantitation of 2 ng/mL for DEX. A linear response function was established for the range of concentrations 2.00-2500.0 ng/mL (r > 0.998) for DEX. The intra- and inter-day precision values for DEX met the acceptance criteria as per FDA guidelines. DEX was stable in the battery of stability studies, viz. bench-top, auto-sampler and freeze-thaw cycles. The developed assay method was applied to an oral bioequivalence study in humans.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Zinc salt assisted solvolyses of tertiary alkyl halides

Tertiary alkyl halides undergo facile substitution reactions under solvolytic conditions in presence of zinc ions yielding alcohols, ethers and esters.